Water of crystallization is water that occurs in crystals but is not covalently bonded to a host molecule or ion. The term is archaic and predates modern structural inorganic chemistry, coming from an era when the relationships between stoichiometry and structure were poorly understood. Nonetheless, the concept is pervasive and when employed precisely, the term can be useful. Upon crystallization from water or moist solvents, many compounds incorporate water molecules in their crystalline frameworks. Often, in fact, the species of interest cannot be crystallized in the absence of water, even though no strong bonds to the "guest" water molecules may be apparent.

Classically, "water of crystallization" refers to water that is found in a crystalline framework of a metal complex but that is not directly bonded to the metal ion. Obviously the "water of crystallization" is bound or interacting with some other atoms and ions or it would not be included in the crystalline framework. Consider the case of nickel(II) chloride hexahydrate. This species has the formula NiCl₂(H₂O)₆. Examination of its molecular structure reveals that the crystal consists of ^* subunits that are hydrogen bonded to each other and two isolated molecules of H₂O. Thus 1/3 of the water molecules in the crystal are not directly bonded to Ni²⁺, and these might be termed "water of crystallization".

Compared to inorganic salts, proteins crystallize with unusually large amounts of water in the crystal lattice. A water content of 50 % is not uncommon. The extended hydration shell is what allows the protein crystallographer to argue that the conformation in the crystal is not too far from the native conformation in solution.

Further examples

---

A salt with associated water of crystallization is known as a hydrate. The structure of hydrates can be quite elaborate, because of the existence of hydrogen bonds that define polymeric structures. Historically, the structures of many hydrates was unknown, and the dot in the formula of a hydrate was employed specify the composition without indicating how the water is bound. Examples:

• CuSO₄•5H₂O - copper (II) sulphate pentahydrate
• CoI₂•6H₂O - cobalt (II) iodide hexahydrate
• SnCl₂•2H₂O - stannous chloride dihydrate

Since the latter part of the 20th century, the structures of most common hydrates have been determined by crystallography, so the dot formalism is increasingly obsolete. Another reason for using the dot formalism is simplicity. For many salts, the exact bonding of the water is unimportant because the water molecules are labilized upon dissolution. For example, an aqueous solution prepared from CuSO₄•5H₂O and anhydrous CuSO₄ behave identically. Therefore, knowledge of the degree of hydration is important only for determining the equivalent weight: one mole of CuSO₄•5H₂O weighs more than one mole of CuSO₄. In some cases, the degree of hydration can be critical to the resulting chemical properties. For example, anhydrous RhCl₃ is not soluble in water and is relatively useless in organometallic chemistry whereas RhCl₃•3H₂O is versatile. Similarly, hydrated AlCl₃ is a poor Lewis acid and thus inactive as a catalyst for Friedel-Crafts reactions. Samples of AlCl₃ must therefore be protected from atmospheric moisture to preclude the formation of hydrates.

Crystals of the aforementioned hydrated copper sulphate consists of centers linked to SO₄^2- ions. Copper is surrounded by six oxygen atoms, provided by two different sulfate groups and four molecules of water. A fifth water resides elsewhere in the framework but does not bind directly to copper. The cobalt iodide mentioned above occurs as [Co(H₂O)₆²⁺ and I^-. In the tin chloride, each Sn(II) center is pyramidal (mean O/Cl-Sn-O/Cl angle is 83°) being bound to two chloride ions and one water. The second water in the formula unit is hydrogen-bonded to the chloride and to the coordinated water molecule. Water of crystallization is stabilized by electrostatic attractions, consequently hydrates are common for salts that contain +2 and +3 cations as well as -2 anions. In some cases, the majority of the weight of a compound can arises from water. Glauber's salt, a white crystalline solid Na₂SO₄(H₂O)₁₀ is >50% water by weight.

Some anhydrous compounds are hydrated so easily that they are said to be hygroscopic and are used as drying agents or desiccants. Common drying agents include CaCl₂ and Na₂SO₄.

Analysis

---

The water content of most compounds can be determined with a knowledge of its formula. An unknown sample can be tested with thermogravimetric analyzer. The amount of water of crystallization in a hydrated salt, it is first heated and the amount of anhydrous salt obtained is weighed. The amount of water driven off is then divided by the molar mass of water to obtain the number of molecules of water bound to the salt.

A serious complication to the thermal analysis for the presence of water of hydration is that compounds that contain hydrogen and oxygen will release water when heated, regardless of whether they contained water molecules. Thus, the release of water upon heating, especially to high temperatures, is insufficient criterion for the presence of water in the sample prior to heating. For example, if one heats a carboxylic acid, RCO₂H, one obtains H₂O. No water was present in the starting carboxylic acid.

Examples of waters of crystallization

---

(see K. Waizumi, H. Masuda, H. Ohtaki "X-ray structural studies of FeBr₂4H₂O, CoBr₂4H₂O, NiCl₂ 4H₂O, and CuBr₂4H₂O. cis/trans Selectivity in transition metal(I1) dihalide Tetrahydrate" Inorganica Chimica Acta, 1992 volume 192, pages 173-181.)

Other solvents of crystallization

---

Water is particularly common solvent to be found in crystals because it is small and polar. But all solvents can be found in some host crystals. Water is noteworthy because it is reactive, whereas other solvents such as C₆H₆ are considered to be chemically innocuous. Occasionally more than one solvent is found in a crystal, and often the stoichiometry is variable, reflected in the crystallographic concept of "partial occupancy." It is common and conventional for a chemist to "dry" a sample with a combination of vacuum and heat "to constant weight."

For other solvents of crystallization, analysis is conveniently accomplished by dissolving the sample in a deuterated solvent and analyzing the sample by NMR spectroscopy.

References

---

• Wells, A.F. (1984). Structural Inorganic Chemistry, Oxford: Clarendon Press.
• Chemistry, The Central Ccience, 5th Ed. Brown, T.L., LeMay, H.E. and Bursten, B.E., Prentice Hall, Englewood Cliffs, N.J.
• Chemistry, 4th Ed. Mcmurry, Fay, Pearson Education, Patparganj, Delhi, India

Note: non-Oxford UK English spelling is crystallisation.

Inorganic chemistry

Kristallwasser | Kristallwater | 结晶水

 

Formula of hydrated metal halides	Coordination sphere of the metal	equivalents of water of crystallization	Remarks
VCl3(H2O)6	trans-*+	two
VBr3(H2O)6	trans-*+	two
VI3(H2O)6	*3+	none	iodide competes poorly with water
CrCl3(H2O)6	trans-*+	two	dark green isomer
CrCl3(H2O)6	*2+	one	blue-green isomer
CrCl2(H2O)4	trans-*	none	molecular
CrCl3(H2O)6	*3+	none	violet isomer
CrBr3(H2O)6	trans-*+	two	green isomer
CrBr3(H2O)6	*3+	none	violet isomer
MnCl2(H2O)6	trans-*	two
MnCl2(H2O)4	cis-*	none	note cis molecular
MnBr2(H2O)4	cis-*	none	note cis molecular
MnCl2(H2O)2	trans-*	none	polymeric with bridging chloride
MnBr2(H2O)2	trans-*	none	polymeric with bridging bromide
FeCl2(H2O)6	trans-*	two
FeCl2(H2O)4	trans-*	none	molecular
FeBr2(H2O)4	trans-*	none	molecular
FeCl2(H2O)2	trans-*	none	polymeric with bridging chloride
CoCl2(H2O)6	trans-*	two
CoBr2(H2O)6	trans-*	two
CoBr2(H2O)4	trans-*	none	molecular
CoCl2(H2O)4	cis-*	none	note: cis molecular
CoCl2(H2O)2	trans-*	none	polymeric with bridging chloride
CoBr2(H2O)2	trans-*	none	polymeric with bridging bromide
NiCl2(H2O)6	trans-*	two
NiCl2(H2O)4	cis-*	none	note: cis molecular
NiBr2(H2O)6	trans-*	two
NiCl2(H2O)2	trans-*	none	polymeric with bridging chloride
CuCl2(H2O)2	*2	two	tetragonally distorted two long Cu-Cl distances
CuBr2(H2O)4	*n	two	tetragonally distorted two long Cu-Br distances