A tetrode is an electronic device having four electrodes. The term most commonly applies to a two-grid vacuum tube. It has four electrodes instead of three, as in the case of a triode.
The first grid of a tetrode is the "control grid", because the voltage applied to it causes the plate current to vary. A varying (AC) voltage measured at the plate will be an amplified version of the AC voltage applied to the control grid, thus the tetrode provides voltage gain.
The second grid, usually called a "screen grid" or "shield grid", provides a screening effect, isolating the control grid from the plate. This helps to reduce an undesirable effect in triodes called the "Miller effect", where the gain of the tube causes a feedback effect which increases the apparent capacitance of the tube's grid, thus limiting the tube's high-frequency performance. The screen grid is connected to a positive voltage, and bypassed to the cathode with a capacitor. This shields the grid from the plate, thus reducing Miller capacitance to a very low level and improving the tube's performance at high frequencies.
The triode vacuum tube also develops a "space charge" between the cathode and control grid, which reduces its gain, especially at low plate voltages. The screen grid neutralizes the space charge and increases the tube's gain.
The tetrode tube was developed by Dr. Walter H. Schottky of Siemens & Halske GMBH in Germany during World War I. Thousands of variations of the tetrode design, as well as its later development the pentode, have been manufactured since then.
Tetrode transistors also exist, in the form of dual-gate MOSFETs. They are used mainly in radio receiver equipment like mobile phones.
Vacuum tubes | Tetrode | tetrode | tetroda | Тетрод | Tétrode | Tetrodo