Silicones, or polysiloxanes, are inorganic-organic polymers with the chemical formula *n, where R = organic groups such as methyl, ethyl, and phenyl. These materials consist of an inorganic silicon-oxygen backbone (...-Si-O-Si-O-Si-O-...) with organic side groups attached to the silicon atoms, which are four-coordinate. In some cases organic side groups can be used to link two or more of these -Si-O- backbones together. By varying the -Si-O- chain lengths, side groups, and crosslinking, silicones can be synthesized with a wide variety of properties and compositions. They can vary in consistency from liquid to gel to rubber to hard plastic. The most common type is linear polydimethylsiloxane or PDMS. The second largest group of silicone materials is based on silicone resins, which are formed by branched and cage-like oligosiloxanes. __FORCETOC__
The word "silicone" is derived from ketone. Dimethylsilicone and dimethyl ketone (aka acetone) have analogous formulas, thus it was surmised incorrectly that they have analogous structures. The same terminology is used for compounds such as silane, which is an analogue of methane). A true silicone group with a double bond between oxygen and silicon do not exist (see figure), Polysiloxanes are called "silicone" due to early mistaken assumptions about structure.
Silicone foams have been used in North American as well as the Israeli Dimona nuclear reactor buildings in an attempt to firestop openings within fire-resistance rated wall and floor assemblies to prevent the spread of flames and smoke from one room to another. (The Israelis wisely switched to the somewhat more expensive yet much safer "elastomer" version of this product, which avoids most safety concerns associated with the foamed version.) Silicone foam firestops have been the subject of serious controversy and press attention due to lack of proper bounding and smoke development due to the pyrolysis of combustible components within the foam, hydrogen gas escape, shrinkage and cracking. When properly installed, silicone foam firestops can be fabricated for building code compliance. Advantages include flexibility and high dielectric strength. Disadvantages include poor bounding, combustibility (hard to extinguish) and significant smoke development, which has led to many reportable events for the US Nuclear Regulatory Commission, to ensure proper installations in facilities under their jurisdiction.
Similar methods work for urethane caulking, against which silicones compete quite heavily. White silicones can, at times, turn slightly yellow over time.
The strength and reliability of silicone rubber is widely acknowledged in the construction industry. Automotive body manufacturing plants and paint shops must avoid the presence of all silicones, as a mere hint of its presence in any form can cause severe failures in automotive paints. Vendors and contractors in such plants are often requested to verify in writing that they will not bring any silicones into the plant.
In the plumbing and automotive fields, silicone grease is often used as a lubricant. In plumbing, the grease is typically applied to O-rings in faucets and valves - for example, all official Moen replacement cartridges are pre-lubricated with it. In the automotive field, silicone grease is typically used as a lubricant for brake components since it is stable at high temperatures, is not water-soluble, and is far less likely to foul brake pads.
Silicones | Lubricants | Cosmetic chemicals | Fire
سليكوون | Силикон | Silikon | Silikone | Silikone | Silicona | Silicone | 실리콘 | Silikone | Siliconi | Silicone | シリコーン | Silikon | Silicone | Silikon | Silikon | 硅橡胶
This article is licensed under the GNU Free Documentation License.
It uses material from the
"Silicone".
Home Page • arts • business • computers • games • health • hospitals • home • kids & teens • news • physicians • recreation• reference • regional • science • shopping • society • sports • world