article

A preamplifier (preamp) is an electronic amplifier which precedes another amplifier to prepare an electronic signal for further amplification or processing.

Description


In general, the job of a preamp is to amplify a low level, possibly high impedance, signal to line-level. A list of common sources would include a pickup, microphone, turntable or other transducer. Equalization and tone control may also be applied.

In a home audio system, the term 'preamplifier' may sometimes be used to describe equipment which merely switches between different line level sources and applies a volume control (attenuation), so that no actual amplification may be involved.

In an audio system the second amplifier is typically a power amplifier (power amp). The preamplifier provides voltage gain (about: 10millivolts to 1volt) but no significant currentgain. The power amplifier provides the higher current necessary to drive loudspeakers.

Preamplifiers may be:

  • incorporated into the housing or chassis of the amplifier they feed
  • in a separate housing
  • mounted in other pieces of equipment, such as turntables, microphones and electric basses.
  • close to the signal source, remote from the next amplifier -- eg: beside hi-fi system, then feeding into a computer in the home office.

To avoid "noise" be sure the metal chassis are interconnected, and shielded cables are so connected at the source end only. No paint under or between the wire and connection! The use of battery power is good both for audio preamps and amplifiers.

Examples


See also


External links


Electronic amplifiers

Forforstærker | מגבר קדם | Voorversterker

 

This article is licensed under the GNU Free Documentation License. It uses material from the "Preamplifier".

Home Pageartsbusinesscomputersgameshealthhospitalshomekids & teensnewsphysiciansrecreationreferenceregionalscienceshoppingsocietysportsworld