This article is about a measure of optical absorbance. Sometimes the term 'optical density' is also used to describe a material's refractive index, see refractive index.

Optical density is the absorbance of an optical element for a given wavelength λ per unit distance:

$OD\_\backslash lambda\; =\; \{A\_\backslash lambda\; \backslash over\; l\}\; =\; -\{1\; \backslash over\; l\}\; \backslash log\_\{10\}\; T\; =\; \{1\; \backslash over\; l\}\backslash log\_\{10\}\; \backslash left\; (\{I\_0\; \backslash over\; I\}\; \backslash right\; )$

Where:

{| $l$= the distance that light travels through the sample (i.e., the sample thickness), measured in cm $A\_\backslash lambda$= the absorbance at wavelength λ $T$= the per-unit transmittance $I\_0$= the intensity of the incident light beam $I$= the intensity of the transmitted light beam

Although absorbance doesn't have true units, it's quite often reported in "Absorbance Units" or AU. Accordingly, optical density is measured in ODU, which are equivalent to AU cm⁻¹.

The higher the optical density, the lower the transmittance. Optical density times 10 is equal to a transmission loss rate expressed in decibels per cm, e.g., an optical density of 0.3 corresponds to a transmission loss of 3 dB per cm.

Optical density is sometimes defined without regard to the length of the sample; in this case it is a synonym for absorbance. Neutral density filters are typically quantified this way.

References

• Federal Standard 1037C
• MIL-STD-188

Densidad óptica | Absorptivité molaire | Optische dichtheid