Hydropower

Hydropower (or waterpower) harnesses the energy of moving or falling water. This is usually in the form of hydroelectricity from a dam, but it can be used directly as a mechanical force. The term refers to a number of systems in which flowing water drives a hydraulic turbine or waterwheel.

Prior to the widespread availability of commercial electricity, hydropower was used for milling, textile manufacture, and the operation of sawmills. In the 1830s, at the height of the canal-building era, hydropower was used to transport barge traffic up and down steep hills using the technology of inclined plane railroads.

Types of water power

There are many forms of water power:

Waterwheels , used for hundreds of years to power mills and machinery
Hydroelectric energy, a term usually reserved for hydroelectric dams.
Tidal power, which captures energy from the tides in horizontal direction
Tidal stream power, which does the same vertically
Wave power, which uses the energy in waves

Hydroelectric power

Main article: Hydroelectricity

Hydroelectric power now supplies about 715,000 MWe or 19% of world electricity (16% in 2003). Large dams are still being designed. Apart from a few countries with an abundance of it, hydro power is normally applied to peak-load demand, because it is readily stopped and started. Nevertheless, hydroelectric power is probably not a major option for the future of energy production in the developed nations because most major sites within these nations with the potential for harnessing gravity in this way are either already being exploited or are unavailable for other reasons such as environmental considerations.

Hydropower produces essentially no carbon dioxide or other harmful emissions, in contrast to burning fossil fuels or gas, and so is not a significant contributor to global warming through CO₂. Recent reports have linked reservoir construction to methane, which forms out of decaying submerged plants which grow in the dried up parts of the basis in times of drought. Methane is a greenhouse gas.

Hydroelectric power can be far less expensive than electricity generated from fossil fuel or nuclear energy. Areas with abundant hydroelectric power attract industry with low cost electricity. Recently, increased environmental concerns surrounding hydroelectric power, have begun to outweigh cheap electricity in some countries.

The chief advantage of hydroelectric dams is their ability to handle seasonal (as well as daily) high peak loads. When the electricity demands drop, the dam simply stores more water. Some electricity generators use water dams to store excess energy (often during the night), by using the electricity to pump water up into a basin. The electricity can be re-generated when demand increases. In practice the utilization of stored water in river dams is sometimes complicated by demands for irrigation which may occur out of phase with peak electrical demands.

Tidal power

Main article: Tidal power

Harnessing the tides in a bay or estuary has been achieved in France (since 1966), Canada and Russia, and could be achieved in certain other areas where there is a large tidal range. The trapped water can be used to turn turbines as it is released through the tidal barrage in either direction. Worldwide this technology appears to have little potential, largely due to environmental constraints. Another possible fault is that the system would generate electricity most efficiently if it were to generate electricity in bursts, every six hours (once every tide). Obviously, this limits the applications for which tidal energy can be used.

Tidal stream power

A relatively new technology development, tidal stream generators draw energy from underwater currents in much the same way that wind generators are powered by the wind. The much higher density of water means that there is the potential for a single generator to provide significant levels of power. Tidal stream technology is at the very early stages of development though and will require significantly more research before it becomes a significant contributor to electrical generation needs.

Several prototypes have however shown some promise. For example, in the UK in 2003, a 300 kW Seaflow marine current propeller type turbine was tested off the north coast of Devon, and a 150 kW oscillating hydroplane device, the Stingray, was tested off the Scottish coast. Another British device, the Hydro Venturi, is to be tested in San Francisco Bay.

The Canadian company Blue Energy has plans for installing very large arrays tidal current devices mounted in what they call a 'tidal fence' in various locations around the world, based on a vertical axis turbine design.

Wave power

Main article: Wave power

Harnessing power from ocean surface wave motion is a possibility which might yield much more energy than tides. The feasibility of this has been investigated, particularly in the UK. Generators either coupled to floating devices or turned by air displaced by waves in a hollow concrete structure would produce electricity for delivery to shore. Numerous practical problems have frustrated progress.

A prototype shore based wave power generator is being constructed at Port Kembla in Australia and is expected to generate up to 500 MWh per annum. The Wave Energy Converter has been constructed (as of July 2005) and initial test results have exceeded expectations in terms of energy production during times of low wave energy. The energy of waves crashing against the shore is absorbed by an air driven generator and converted to electricity. For countries with large coastlines and rough sea conditions the energy density of breaking waves offers the possibility of generating electricity in utility volumes. Excess power in periods of rough sea could be used to generate renewable hydrogen.

Physics

A hydropower resource can be measured according to the amount of available power, or energy per unit time. The power of a given situation is a function of the hydraulic head and rate of fluid flow. When dealing with water in a reservoir, the head is the height of the water level in the reservoir relative to its height after it has left. Each unit of water therefore can produce a quantity of work equal to its weight times the head.

The amount of energy $E$ released by lowering an object of mass $m$ by a height $h$ in a gravitational field is

E = mgh

where

g

is the acceleration due to gravity.

The energy available to hydroelectric dams is the energy that can be liberated by lowering water in a controlled way. In these situations, the power is related to the mass flow rate.

\frac{E}{t} = \frac{m}{t}gh

Substituting $P$ for $E/t$ and expressing $m/t$ in terms of the volume of liquid moved per unit time (the rate of fluid flow $\phi$ ) and the density of water, we arrive at the usual form of this expression:

P = \rho \varphi g \cdot h

For $P$ in watts, $\rho$ is measured in kg/m³, $\phi$ is measured in m³/s, $g$ (gee) is measured in m/s², and $h$ is measured in metres.

Some hydropower systems such as water wheels can draw power from the flow of a body of water without necessarily changing its height. In this case, the available power is the kinetic energy of the flowing water.

P = \frac{1}{2}\rho\varphi v^2

where

v

is the velocity of the water,

or with

\varphi = A \cdot v

where A is the area through which the water passes, also

P = \frac{1}{2}\rho A v^3.

Over-shot water wheels can efficiently capture both types of energy.

Small scale hydro power

Small scale hydro or micro-hydro power has been increasingly used as an alternative energy source, especially in remote areas where other power sources are not viable. Small scale hydro power systems can be installed in small rivers or streams with little or no discernible environmental effect on things such as fish migration. Most small scale hydro power systems make no use of a dam or major water diversion, but rather use water wheels with little environmental impact.

There are some major factors to consider when installing a micro-hydro system. First is the amount of water flow available on a consistent basis; periods of little or no rain can greatly affect plant operation. Second is what is known as head, this is the amount of drop the water has between the intake and the exit of the system. The more head, the larger amount of power can be generated. Third, there can be legal and regulatory issues that must be researched. Most counties, cities, and states have their own regulations about water rights and easements.

Increasingly over the last few years, the U.S. Government has increased its support for alternative power generation. Many resources such as grants, loans, and tax benefits are available for installing a small scale hydro system.

In poor areas of the world, many remote communities still do not have access to electricity. Micro hydro power, which has a capacity of 100 kW or less, allows such communities to generate their own electricity¹. This is a form of power which is supported by various organizations such as the UK's Intermediate Technology Development Group.

Micro-hydro power can be used directly as "shaft power" for many industrial applications. Alternatively, the preferred option for domestic energy supply is to convert to electricity either through the use of a custom generator or through a reversed electric motor which, while often less efficient is more likely to be available locally and cheaply.

References

Micro-hydro power, Adam Harvey, 2004, Intermediate Technology Development Group, retrieved 1 January 2005 from http://www.itdg.org/docs/technical_information_service/micro_hydro_power.pdf.
Microhydropower Systems, U.S. Department of Energy, Energy Efficiency and Renewable Energy, 2005

External links

International Centre for Hydropower (ICH) hydropower portal with links to numerous organisations related to hydropower worldwide
Practical Action (ITDG) a UK charity developing micro-hydro power and giving extensive technical documentation.
British Hydropower Association
microhydropower.net
Hydropower's Future
Microhydropower 'how to'
Congressional Research Service (CRS) Reports regarding Hydropower
Hydro Quebec
HydroPowered UK Group Group offering information regarding water powered mechanics via eBook

Gourt Home::Gourt :: Hydropower