Gourt Home::Gourt :: Head crash
A head crash occurs when the read-write head of a hard disk drive touches its rotating platter. The head normally rides on a thin film of moving air entrapped at the surface of the platter (some drives of the mid-1990s used a thin fluid layer instead). Higher capacity drives (using the same size and number of platters) are obtained by running the head closer to the platter. A tiny particle of dirt or other detritus can cause the head to bounce against the disk, destroying the thin magnetic coating on the disk. Since most modern drives spin at rates between 5,000 and 15,000 rpm, the damage caused to the magnetic coating can be extensive. At 7,200 rpm the edge of the platter is traveling at over 74 miles per hour (120 km/h), as the crashed head drags over the platter surface the read-write head generally overheats, making the drive or at least parts of it unusable until the heads cool. Following a head crash, particles of material scraped free of the drive surface greatly increase the chances of further head crashes or damage to the platters.
See also
External links
- Noises that indicate a defective drive. (Hitachi)
- 25 second (4MB) MPEG video of drive spining up and experiencing a crash (listen to noise).
"Head crash"