Fertilizers or fertilisers are compounds given to plants with the intention of promoting growth; they are usually applied either via the soil, for uptake by plant roots, or by foliar feeding, for uptake through leaves. Fertilizers can be organic (composed of organic matter, i.e. carbon based), or inorganic (containing simple, inorganic chemicals). They can be naturally-occurring compounds such as peat or mineral deposits, or manufactured through natural processes (such as composting) or chemical processes (such as the Haber process).
Fertilizers typically provide, in varying proportions, the three major plant nutrients (nitrogen, phosphorus, and potassium), the secondary plant nutrients (calcium, sulfur, magnesium), and sometimes trace elements (or micronutrients) with a role in plant nutrition: boron, manganese, iron, zinc, copper and molybdenum.
Macronutrients and micronutrients
Fertilizers can be divided into macronutrients or micronutrients. There are three macronutrients: nitrogen, potassium, and phosphorus, which are consumed in high quantities and normally present as whole number percentages in plant tissues. There are many micronutrients, and their importance and occurrence differ from plant to plant. In general, most present from 5 to 100 parts per million (ppm) by mass. Examples of micronutrients are as follows: boron (B), calcium (Ca), copper (Cu), magnesium (Mg), iron (Fe), molybdenum (Mo), and zinc (Zn).
Macronutrient fertilizers
Synthesized materials are also called artificial fertilizers, and may be described as straight, where the product predominantly contains the three primary ingredients of nitrogen (N), phosphorus (P) and potassium (K), which are known as N-P-K fertilizers or compound fertilizers when elements are mixed intentionally. They are named or labeled according to the content of these three elements, which are macronutrients. The mass fraction (percent) nitrogen is reported directly. However, phosphorus is reported as diphosphorus pentoxide (P2O5), the anhydride of phosphoric acid, and potassium is reported as potash or potassium oxide (K2O), which is the anhydride of potassium hydroxide. Fertilizer composition is expressed in this fashion for historical reasons in the way it was analyzed (conversion to ash for P and K); this practice dates back to Justus von Liebig (see more below). Consequently, an 18-51-20 fertilizer would have 18% nitrogen as N, 51% phosphorus as P2O5, and 20% potassium as K2O. Although analyses are no longer carried out by ashing first, the naming convention remains. If nitrogen is the main element, they are often described as nitrogen fertilizers.
Agricultural versus Horticultural Fertilizers
In general, agricultural fertilizers contain only one or two macronutrients. Agricultural fertilizers are intended to be applied infrequently and normally prior to seeding or concurrently with it. Examples of agricultural fertilizers are granular triple superphosphate, potassium chloride, urea, and anhydrous ammonia. The commodity nature of fertilizer, combined with the high cost of shipping, leads to use of locally available materials or those from the closest/cheapest source, which may vary with factors affecting transportation by rail, ship, or truck. In other words, a particular nitrogen source may be very popular in one part of the country while another is very popular in another geographic region only due to factors unrelated to agronomic concerns.
Horticultural or specialty fertilizers, on the other hand, are formulated from many of the same compounds and some others to produce well-balanced fertilizers that also contain micronutrients. Some materials, such as ammonium nitrate, are used minimally in large scale production farming. The 18-51-20 example above is a horticultural fertilizer formulated with high phosphorus to promote bloom development in ornamental flowers. Horticultural fertilizers may be water-soluble (instant release) or relatively insoluble (controlled release). Controlled release fertilizers are also referred to as sustained release or timed release. Many controlled release fertilizers are intended to be applied approximately every 3-6 months, depending on watering, growth rates, and other conditions, whereas water-soluble fertilizers must be applied at least every 1-2 weeks and can be applied as often as every watering if sufficiently dilute. Unlike agricultural fertilizers, horticultural fertilizers are marketed directly to consumers and become part of retail product distribution lines.
Justus von Liebig
Chemist Justus von Liebig (in the 19th century) contributed greatly to understanding the role of inorganic compounds in plant nutrition and devised the concept of Liebig's barrel to illustrate the significance of inadequate concentrations of essential nutrients. At the same time he deemphasized the role of humus. This theory was influential in the great expansion in use of artificial fertilizers in the 20th century.
Nitrogen fertilizer is often synthesized using the Haber-Bosch process, which produces ammonia. This ammonia is applied directly to the soil or used to produce other compounds, notably ammonium nitrate, a dry, concentrated product. It can also be used in the Odda Process to produce compound fertilizers such as 15-15-15.
Inorganic fertilizers sometimes do not replace trace mineral elements in the soil which become gradually depleted by crops grown there. This has been linked to studies which have shown a marked fall (up to 75%) in the quantities of such minerals present in fruit and vegetables. One exception to this is in Western Australia where deficiencies of zinc, copper, manganese, iron and molybdenum were identifed as limiting the growth of crops and pastures in the 1940's and 1950's. Soils in Western Australia are very old, highly weathered and deficient in many of the major nutrients and trace elements. Since this time these trace elements are routinely added to inorganic fertilizers used in Agriculture in this state.
In many countries there is the public perception that inorganic fertilizers "poison the soil" and result in "low quality" produce. However, there is very little (if any) scientific evidence to support these views. When used appropriately, inorganic fertilizers enhance plant growth, the accumulation of organic matter and the biological activity of the soil, while reducing the risk of water run-off, overgrazing and soil erosion. The nutritional value of plants for human and animal consumption is typically improved when inorganic fertilizers are used appropriately.
The decomposing crop residue from prior years is another source of fertility. Though not strictly considered "fertilizer", the distinction seems more a matter of words than reality.
Some ambiguity in the usage of the term 'organic' exists because some of synthetic fertilizers, such as urea and urea formaldehyde, are fully organic in the sense of organic chemistry. In fact, it would be difficult to chemically distinguish between urea of biological origin and that produced synthetically. On the other hand, some fertilizer materials commonly approved for organic agriculture, such as powdered limestone, mined "rock phosphate" and Chilean saltpeter, are inorganic in the use of the term by chemistry.
Although the density of nutrients in organic material is comparatively modest, they have some advantages. For one thing organic growers typically produce some or all of their fertilizer on-site, thus lowering operating costs considerably. Then there is the matter of how effective they are at promoting plant growth, chemical soil test results aside. The answers are encouraging. Since the majority of nitrogen supplying organic fertilizers contain insoluble nitrogen and are slow release fertilizers their effectiveness can be greater than conventional nitrogen fertilzers.
Implicit in modern theories of organic agriculture is the idea that the pendulum has swung the other way to some extent in thinking about plant nutrition. While admitting the obvious success of Leibig's theory, they stress that there are serious limitations to the current methods of implementing it via chemical fertilization. They re-emphasize the role of humus and other organic components of soil, which are believed to play several important roles:
Organics also have the advantage of avoiding certain long-term problems associated with the regular heavy use of artificial fertilizers:
Organic fertilizers also have their disadvantages:
In practice a compromise between the use of artificial and organic fertilizers is common, typically by using inorganic fertilizers supplemented with the application of organics that are readily available such as the return of crop residues or the application of manure.
It is important to differentiate between what we mean by organic fertilizers and fertilizers approved for use in organic farming and organic gardening by organizations and authorities who provide organic certification services. Some approved fertilizers may be inorganic, naturally occurring chemical compounds, e.g. minerals..
It is also possible to over-apply organic fertilizers. However: their nutrient content, their solubility, and their release rates are typically much lower than chemical fertilizers, partially because by their nature, most organic fertilizers also provide increased physical and biological storage mechanisms to soils.
The problem of over-fertilization is primarily associated with the use of artificial fertilizers, because of the massive quantities applied and the destructive nature of chemical fertilizers on soil nutrient holding structures. The high solubilities of chemical fertilizers also exacerbate their tendency to degrade ecosystems.
Storage and application of some fertilizers in some weather or soil conditions can cause emissions of the greenhouse gas nitrous oxide (N2O). Ammonia gas (NH3) may be emitted following application of inorganic fertilizers, or manure or slurry. Besides supplying nitrogen, ammonia can also increase soil acidity (lower pH, or "souring").
For these reasons, it is recommended that knowledge of the nutrient content of the soil and nutrient requirements of the crop are carefully balanced with application of nutrients in inorganic fertiliser especially. This process is called nutrient budgeting. By careful monitoring of soil conditions, farmers can avoid wasting expensive fertilizers, and also avoid the potential costs of cleaning up any pollution created as a byproduct of their farming.
The concentration of up to 100 mg/kg of Cadmium in phosphate minerals (for example Nauru and the Christmas islands ) increases the contamination of soil with Cadmium, for example in New Zealand. Uranium is another example for impurities of fertilizers
Nitrogen metabolism | Agriculture | Agronomy | Agricultural soil science | Soil chemistry | Lawn care
Fertilitzant | Gødning | Dünger | Fertilizante | Engrais | Dungo | דשן | Dünger | Könsmès | Kunstmest | 肥料 | Gjødsel | Nawóz | Fertilizante | Удобрение | Fertilizer | NPK | Lannoite | Gödsel | உரம் | Gübre | Добрива
This article is licensed under the GNU Free Documentation License.
It uses material from the
"Fertilizer".
Home Page • arts • business • computers • games • health • hospitals • home • kids & teens • news • physicians • recreation• reference • regional • science • shopping • society • sports • world