Gourt Home::Gourt :: Cyclopropane
| } | |
|---|---|
| Chemical name | } |
| Chemical formula | } |
| Molecular mass | } g/mol |
| CAS number | * |
| Density | } g/cm3 |
| Melting point | } °C |
| Boiling point | } °C |
| SMILES | } |
| Chemical infobox | |
Cyclopropane is a cycloalkane molecule with the molecular formula C3H6 consisting of three carbon atoms linked to each other to form a ring, with each carbon atom bearing two hydrogen atoms. The bonds between the carbon atoms are a great deal weaker than in a typical carbon-carbon bond. This is the result of the 60° angle between the carbon atoms, which is far less than the normal angle of 109.5°. This strain has to be subtracted from the normal C-C bond energy, making the resultant compound more reactive than acyclic alkanes and other cycloalkanes such as cyclohexane and cyclopentane. This is the banana bond description of cycloalkanes.
There is also torsional strain because the hydrogen atoms are held in the eclipsed conformation.
However, cyclopropanes are more stable than a simple angle strain analysis would suggest. Cyclopropane can also be modeled as a three-center-bonded orbital combination of methylene carbenes. This results in the walsh orbital description of cyclopropane, where the C-C bonds have mostly pi character. This is also why cyclopropanes often have reactivity similar to alkenes. This is also why carbenes can easily add into alkenes to produce cyclopropanes. Cyclopropanes taken to the extreme are tetrahedranes and propellanes.
Cyclopropane is an anaesthetic when inhaled, but has been superseded by other agents in modern anaesthetic practice. This is due to its extreme reactivity under normal conditions: when the gas is mixed with oxygen there is a significant risk of explosion.
Safety
Because of the strain in the carbon-carbon bonds of cyclopropane, the molecule has an enormous amount of potential energy. In pure form, it will break down to form linear hydrocarbons, including "normal", non-cyclic propene. This decomposition is potentially explosive, especially if the cyclopropane is liquified, pressurized, or contained within tanks. Explosions of cyclopropane and oxygen are even more powerful, because the energy released by the formation of normal propane is compounded by the energy released via the oxidation of the carbon and hydrogen present. At room temperature, sufficient volumes of liquified cyclopropane will self-detonate. To guard against this, the liquid is shipped in cylinders filled with tungsten wool, which prevents high-speed collisions between molecules and vastly improves stability. Pipes to carry cyclopropane must likewise be of small diameter, or else filled with unreactive metal or glass wool, to prevent explosions. Even if these precautions are followed, cyclopropane is dangerous to handle and manufacture, and is no longer used for anaesthesia.
Cyclopropanes
Cyclopropanes are a class of organic compounds sharing the common cyclopropyl functional group. These compounds are found in biomolecules for instance the pyrethrum insecticides (found in certain Chrysanthemum species) contain a cyclopropane ring.
Organic synthesis
Cyclopropanes can be prepared in the laboratory by organic synthesis in various ways and many methods are simply called cyclopropanation:- addition to an alkene of a carbenoid in the Simmons-Smith reaction for example to Cinnamyl alcohol Cyclopropanemethanol, 2-phenyl-, (1S-trans)- André B. Charette and Hélène Lebel Organic Syntheses, Coll. Vol. 10, p.613 (2004); Vol. 76, p.86 (1999) Link.. In one adaptation Unusual Ambiphilic Carbenoid Equivalent in Amide Cyclopropanation Kuo-Wei Lin, Shiuan Yan, I-Lin Hsieh, and Tu-Hsin Yan Org. Lett.; 2006; 8(11) pp 2265 - 2267; Abstract an amide is reacted with two equivalents of dichloromethane aided by titanium tetrachloride and magnesium:
- a possible reaction mechanism for this cyclopropanation was proposed Reaction mechanism: Magnesium reacts with titanium tetrachloride 1 to Grignard reagent 2 in equilibrium with divalent Titanium(II) chloride 3 which adds to dichloromethane to adduct 4. Another insertion of magnesium and loss of magnesium dichloride gives the Schrock carbene 6 which reacts with the carbonyl group in amide 7. Loss of titanium oxychloride gives the enamine 9 which continuous to react with another carbene and finally to the cyclopropane. Notes: Instead of chloride, titanium can also be coordinated to solvent. In equally plausible mechanisms the intermediates are Simmons-Smith like:
- addition to an alkene of a carbene such as dibromocarbene in the synthesis of propellane Kathleen R. Mondanaro and William P. Dailey Organic Syntheses, Coll. Vol. 10, p.658 (2004); Vol. 75, p.98 (1998) [http://www.orgsynth.org/orgsyn/prep.asp?prep=v75p0098 Link or methyl diazoacetate Butanoic acid, 3,3-dimethyl-4-oxo-, methyl ester Hans-Ulrich Reissig, Ingrid Reichelt, and Thomas Kunz Organic Syntheses, Coll. Vol. 9, p.573 (1998); Vol. 71, p.189 (1993). Link
- nucleophilic displacement of a leaving group by a carbon nucleophile in a 1,3 relationship, for example the synthesis of cyclopropylacetylene from 5-chloro-1-pentyne Cyclopropylaetylene Edward G. Corley, Andrew S. Thompson, Martha Huntington Organic Syntheses, Coll. Vol. 10, p.456 (2004); Vol. 77, p.231 (2000) Link.. Another example can be found in the Bingel reaction.
- an intramolecular Wurtz coupling for example in the synthesis of bicycloBicyclo[1.1.1butane Gary M. Lampman and James C. Aumiller Organic Syntheses, Coll. Vol. 6, p.133 (1988); Vol. 51, p.55 (1971) Link.
- Rearrangement reaction of certain cyclobutane compounds for instance the conversion of 1,2-cyclobutanediol to cyclopropanecarboxaldehyde J. P. Barnier, J. Champion, and J. M. Conia Organic Syntheses, Coll. Vol. 7, p.129 (1990); Vol. 60, p.25 (1981) Link.
Organic reactions
Although cyclopropanes are formally cycloalkanes they are very reactive due to considerable strain energy and due to double bond character.- Cyclopropyl groups participate in cycloaddition reaction such as the formal *cycloaddition shown below:
- This asymmetric synthesis is catalyzed by a rhodium BINAP system with 96% enantiomeric excess Asymmetric Catalysis of the + 2 Cycloaddition Reaction of Vinylcyclopropanes and -Systems
Paul A. Wender, Lars O. Haustedt, Jaehong Lim, Jennifer A. Love, Travis J. Williams, and Joo-Yong Yoon J. Am. Chem. Soc.; 2006; 128(19) pp 6302 - 6303; Abstract.- Cyclopropyl groups also engage in many rearrangement reactions. An extreme example is found in the compound bullvalene. A cyclopropane ring is an intermediate in the Favorskii rearrangement. Certain methylenecyclopropanes are found to convert to cyclobutenes PtCl2-Catalyzed Rearrangement of Methylenecyclopropanes Alois Fürstner and Christophe Aïssa J. Am. Chem. Soc.; 2006; 128(19) pp 6306 -6307; Abstract:
- This reaction is catalyzed by platinum(II) chloride in a carbon monoxide environment. The proposed reaction mechanism is supported by deuterium labeling Reaction mechanism: The starting compound contains one deuterium atom (D), in the first step PtCl2 coordinates to the double bond in 1a. The next step is oxidative addition to 1b which is a non-classical ion. This intermediate rearranges to the cyclobutane carbocation 1c which has also some carbene character through one of its resonance structures. The next step is a deuterium migration to the more stable benzylic carbocation after which the cyclobutene is liberated. .
- In another version of the same reaction Palladium-Catalyzed Ring Enlargement of Aryl-Substituted Methylenecyclopropanes to Cyclobutenes Min Shi, Le-Ping Liu, and Jie Tang J. Am. Chem. Soc.; 2006; 128(23) pp 7430 - 7431; the catalyst is PdBr2 is prepared in situ from palladium(II) acetate and copper(II) bromide and the solvent is toluene.
External links
- Molview from bluerhinos.co.uk See Cyclopropane in 3D
References
Anesthetics | Cycloalkanes | functional groups
Cyclopropan | Κυκλοπροπάνιο | Cyclopropane | Ciclopropano | Ciclopropano | Cycloprôpan
"Cyclopropane"
