Cleavage (crystal)

Cleavage, in mineralogy, is the tendency of crystalline materials to split along definite planes, creating smooth surfaces, of which there are several named types:

Basal cleavage: cleavage parallel to the base of a crystal, or to the plane of the lateral axes. This occurs quite easily in graphite, making the material feel slippery.

Cubic cleavage: cleavage parallel to the faces of a cube. This is the source of the cubic shape seen in crystals of ground table salt (sodium chloride).

Diagonal cleavage: cleavage parallel to a diagonal plane.

Lateral cleavage: cleavage parallel to the lateral planes.

Octahedral, Dodecahedral, or Rhombohedral cleavage: cleavage parallel to the faces of an octahedron, dodecahedron, or rhombohedron (respectively). Octahedral cleavage is seen in common semiconductors (see below).

Prismatic cleavage, cleavage parallel to a vertical Prism.

This is of technical importance in the electronics industry and in the cutting of gemstones. While precious stones are generally cleaved by impact, man-made single crystals of semiconductor materials are generally sold as thin wafers which are much easier to cleave. Simply pressing a silicon wafer against a soft surface and scratching its edge with a diamond scribe is usually enough to cause cleavage; however, when dicing a wafer to form chips, a procedure of scoring and breaking is often followed for greater control. The vast majority of commercial semiconductors (Si, , GaAs, InSb, etc.) are diamond cubic, a space group for which octahedral cleavage is observed. This means that some orientations of wafer allow near-perfect rectangles to be cleaved.

References

Hurlbut, Cornelius S.; Klein, Cornelis, 1985, Manual of Mineralogy, 20th ed., Wiley, pp. 200 - 202, ISBN 0471805807
Mineral galleries: Mineral properties - Cleavage

Crystallography | Mineralogy

Gourt Home::Gourt :: Cleavage (crystal)

See also

References