Gourt Home::Gourt :: Churning (butter)
Churning is the process of shaking up whole milk (or cream) to make butter, and various forms of butter churn have been used for the purpose. In Europe from the Renaissance until the Industrial Revolution, this was generally as simple as a barrel on rockers, which was rocked by hand. Afterward, mechanical means of churning were usually substituted.
Butter churning
Butter is essentially the fat of the milk. It is usually made from sweet cream and is salted. However, it can also be made from acidulated or bacteriologically soured cream and saltless (sweet) butters are also available. Well into the 19th century butter was still made from cream that had been allowed to stand and sour naturally. The cream was then skimmed from the top of the milk and poured into a wooden tub.
Buttermaking was done by hand in butter churns. The natural souring process is, however, a very sensitive one and infection by foreign micro-organisms often spoiled the result. Today's commercial buttermaking is a product of the knowledge and experience gained over the years in such matters as hygiene, bacterial acidifying and heat treatment, as well as the rapid technical development that has led to the advanced machinery now used. The commercial cream separator was introduced at the end of the 19th century, the continuous churn had been commercialized by the middle of the 20th century.
The creation process
Changing whole milk to butter is a process of transforming a fat-in-water emulsion (milk) to a water-in-fat emulsion (butter). Whole milk is a dilute emulsion of tiny fat globules surrounded by lipoprotein membranes that keep the fat globules separate from one another.
Butter is made from cream that's been separated from whole milk and then cooled; fat droplets clump more easily when they’re hard rather than soft. However, making good butter also depends upon other factors, such as the fat content of the cream and its acidity.
The process can be summarized in 3 steps:
- Churning physically agitates the cream until it ruptures the fragile membranes surrounding the milk fat. Once broken, the fat droplets can join with each other and form clumps of fat, or butter grains.
- As churning continues, larger clusters of fat collect until they begin to form a network with the air bubbles that are generated by the churning; this traps the liquid and produces a foam. As the fat clumps increase in size, there are also fewer to enclose the air cells. So the bubbles pop, run together, and the foam begins to leak. This leakage is what we call buttermilk.
- The cream separates into butter and buttermilk. The buttermilk is drained off, and the remaining butter is kneaded to form a network of fat crystals that becomes the continuous phase, or dispersion medium, of a water-in-fat emulsion. Working the butter also creates its desired smoothness. Eventually the water droplets become so finely dispersed in the fat that butter’s texture seems dry.
For more information, see WebExhibits.org.
Historical reference
The Household Cyclopedia of 1881 instructs:
"Let the cream be at the temperature of 55° to 60°, by a Fahrenheit thermometer; this is very important. If the weather be cold put boiling water into the churn for half an hour before you want to use it; when that is poured off strain in the cream through a butter cloth. When the butter is coming, which is easily ascertained by the sound, take off the lid, and with a small, flat board scrape down the sides of the churn, and do the same to the lid: this prevents waste. When the butter is come the butter-milk is to be poured off and spring water put into the churn, and turned for two or three minutes; this is to be then poured away and fresh added, and again the handle turned for a minute or two. Should there be the least milkiness when this is poured from the churn, more must be put in.
"The butter is then to be placed on a board or marble slab and salted to taste; then with a cream cloth, wrung out in spring water, press all the moisture from it. When dry and firm make it up into rolls with flat boards. The whole process should be completed in three-quarters of an hour. In hot weather pains must be taken to keep the cream from reaching too high a heat. If the dairy be not cool enough, keep the cream-pot in the coldest water you can get; make the butter early in the morning, and place cold water in the churn for a while before it is used."
External links
"Churning (butter)"