Tetrasulfur tetranitride is an
inorganic compound with the formula S
4N
4.
Gold-poppy colored S
4N
4 is the most readily prepared and most important sulfur nitride. It is a key starting precursor to many S-N compounds and has attracted much interest for its unusual structure and bonding.
[Greenwood, N. N.; Earnshaw, A. Chemical Elements; 2nd edition; Butterworth-Heinemann: Boston, MA, 1997, pp 721-725.]
Nitrogen and sulfur have similar ability to attract electrons, a property known as electronegativity. When atoms are so evenly matched, they often form extensive families of covalently bonded structures. Indeed, a large number of S-N and S-NH compounds are known with S4N4 as their parent.
Structure of S4N4
S
4N
4 adopts an unusual “extreme cradle” structure, which was determined in 1944. The structure of S
4N
4 can be viewed as an eight membered ring of alternating
sulfur and
nitrogen atoms. The pairs of sulfur atoms across the ring are further bonded, resulting in a cage-like structure consisting of interlocking five-membered S
3N
2 rings. The nature of the transannular S-S interactions is a matter of debate but has been explained in the context of
molecular orbital theory.
The bonding in S
4N
4 is considered to be delocalized, which is relevant to the equivalency of the S-N distances than expected S-N bond distances.
S4N4 has been shown to co-crystallize with benzene and the C60.[Konarev, D.V. et al. "Donor-acceptor Complexes of Fullerene C60 with Organic and Organometallic Donors"; Journal of Materials Chemistry (2000) Vol 10, num 4, pp. 803-818.]
Properties
S
4N
4 is stable to
air. It is, however, unstable in the
thermodynamic sense with a positive
heat of formation of 460 kJ/mole). This
endothermic heat of formation anticipates its inherent instability, and originates in the difference in energy of S
4N
4 compared to its highly stable decomposition products:
- S4N4 → 2 N2 + 0.5S8
It is not really very unusual for complex molecules to be unstable in a thermodynamic sense yet stable kinetically, this situation describes the great majority of organic compounds. This combination of kinetic stability and thermodynamic instability is, however, uncommon for very simple compositions, such as sulfur nitride.
Because one of its decomposition products is a gas, S4N4 is an explosive. Purer samples tend to be more explosive. Small samples can be detonated by striking with a hammer.
S4N4 is thermochromic, changing from pale yellow below -30 °C to orange at room temperature to deep red above 100 °C.
Synthesis
Until recently, S4N4 was prepared by the reaction of ammonia with SCl2 in carbon tetrachloride followed by extraction into dioxane.[Villena-Blanco, M.; Jolly, W.L.; Tyree, S.Y. Ed.: Inorganic synthesis; Wiley: New York, NY, 1967; Vol. 9, pp. 98-102]
- 6 SCl2 + 16 NH3 → S4N4 + S8 + 12 NH4Cl
A related synthesis employs
NH4Cl in place of ammonia:
- 4 NH4Cl + 6 S2Cl2 → S4N4 + 16 HCl + S8
One might expect this reaction, which begins with an S(II) source, to produce (SNH)
n or S(NH
2)
2, vs. the oxidation state of S(III) in S
4N
4.
A newer synthesis entails the use of {as a precursor with pre-formed S-N bonds. {[Me3Si)2N2S} is prepared by the reaction of lithium bis(trimethylsilyl)amide and SCl2.
- 2 + SCl2 → [(CH3)3Si)2N2S + 2 LiCl
The {
*2S} reacts with the combination of SCl
2 and
SO2Cl2 to form S
4N
4.
[Maaninen, A.; Shvari, J.; Laitinen, R.S.; Chivers, T; Inorganic Synthesis; (2002) Vol. 33, pp. 196-199]
- *2S + SCl2 + SO2Cl2 → S4N4 + 4 (CH3)3SiCl + SO2
Acid-base reactions
S
4N
4 serves as a
Lewis base by binding through nitrogen to strongly
Lewis acidic compounds such as SbCl
5 and SO
3. The cage is distorted in these adducts, thus delocolization of
electrons may be disrupted.
- S4N4 + SbCl5 S4N4*SbCl5
- S4N4 + SO3 S4N4*SO3
It is protonated by HBF4:
- S4N4 + HBF4 → S4N4H+BF4
The soft Lewis acid CuCl forms a polymer with intact S4N4 rings as the bridging ligands:
- nS4N4 + nCuCl → (S4N4)n-μ-(-Cu-Cl-)n
S4N4 is sensitive to hydrolysis in the presence of base. Dilute NaOH hydrolyzes S4N4 as follows:
- 2S4N4 + 6OH- + 9H2O → S2O32- + 2S3O62- + 8NH3
While more concentrated base will yield sulfite:
- S4N4 + 6OH- + 3H2O → S2O32- + 2SO32- + 4NH3
Precursor to other S-N compounds
Many important S-N compounds are prepared from S
4N
4.
[Bojes, J.; Chivers, T; Oakley, R. D. Inorganic Synthesis (1989) Vol 25, pp. 30-40.]
Reaction with
piperidine generates
*−:
- 3 S4N4 + 4 C5H10NH → (C5H10NH2)* + (C5H10N)2S + 3/8 S8 + N2
It is interesting to note and indicative of the richness of this area that the related cation is also known, i.e.
*+.
Treatment with tetramethylammonium azide produces the 10 pi-electron heterocycle:
- S4N4 + 4 NMe4N3 → NMe4* + 1/8 S8 + 2 N2
In an apparently related reaction, the use of azide as its PPN
+ salt (PPN = Ph
3PNPPh
3, where Ph
3P =
triphenylphosphine) gives the blue
perthionitrite salt:
- 2 S4N4 + NMe4N3 → (PPN)* + 1/2 S8 + 5 N2
"SNx"
Passing gaseous S
4N
4 over
silver metal yields the low temperature
superconductor polysulfurnitride (transition temperature (0.26±0.03) K
[R. L. Greene, G. B. Street and L. J. Suter, Superconductivity in Polysulfur Nitride (SN)x, Phys. Rev. Lett. 34, 577–579 (1975) ]), known as "(SN)
x." In the conversion, the
silver first becomes sulfided, and the resulting Ag
2S catalyzes the conversion of the S
4N
4 into the four-membered ring S
2N
2, which readily
polymerizes.
- S4N4 + 8 Ag → 4 Ag2S + 2N2
- S4N4 → (SN)x
External links
References
Further reading
- Chivers, T. “A Guide To Chalcogen-Nitrogen Chemistry” World Scientific Publishing Company: Singapore; 2004. ISBN 9812560955
Explosive chemicals | Inorganic compounds | Sulfur compounds | Nitrides