Moore's law

Moore's Law is the 1965 prediction by Gordon Moore (co-founder of Intel) that the transistor density of semiconductor chips would double roughly every 18 months.

Earliest forms

Moore's original statement can be found in his publication "Cramming more components onto integrated circuits", Electronics Magazine 19 April, 1965:

Under the assumption that chip "complexity" is proportional to the number of transistors, regardless of what they do, the law has largely held the test of time to date. However, one could argue that the per-transistor complexity is less in large RAM cache arrays than in execution units. From this perspective, the validity of Moore's law may be more questionable.

Gordon Moore's observation was not named a "law" by Moore himself, but by the Caltech professor, VLSI pioneer, and entrepreneur Carver Mead.

Moore may have heard Douglas Engelbart, a co-inventor of today's mechanical computer mouse, discuss the projected downscaling of integrated circuit size in a 1960 lecture.NY Times article April 17, 2005 In 1975, Moore projected a doubling only every two years. He is adamant that he himself never said "every 18 months", but that is how it has been quoted. The SEMATECH roadmap follows a 24 month cycle.

In April 2005 Intel offered $10,000 to purchase a copy of the original Electronics Magazine.

Formulations of Moore's law

The most popular formulation is of the doubling of the number of transistors on integrated circuits (a rough measure of computer processing power) every 18 months. At the end of the 1970s, Moore's Law became known as the limit for the number of transistors on the most complex chips. However, it is also common to cite Moore's law to refer to the rapidly continuing advance in computing power per unit cost.

A similar law has held for hard disk storage cost per unit of information. The rate of progression in disk storage over the past decades has actually sped up more than once, corresponding to the utilization of error correcting codes, the magnetoresistive effect and the giant magnetoresistive effect. The current rate of increase in hard drive capacity is roughly similar to the rate of increase in transistor count and has been dubbed Kryder's law. However, recent trends show that this rate is dropping, and has not been met for the last three years.

Another version states that RAM storage capacity increases at the same rate as processing power. However, memory speeds have not increased as fast as CPU speeds in recent years, leading to a heavy reliance on caching in current computer systems.

An industry driver

Although Moore's law was initially made in the form of an observation and prediction, the more widely it became accepted, the more it served as a goal for an entire industry. This drove both marketing and engineering departments of semiconductor manufacturers to focus enormous energy aiming for the specified increase in processing power that it was presumed one or more of their competitors would soon actually attain. In this regard it can be viewed as a self-fulfilling prophecy.

The implications of Moore's law for computer component suppliers are very significant. A typical major design project (such as an all-new CPU or hard drive) takes between two and five years to reach production-ready status. In consequence, component manufacturers face enormous timescale pressures—just a few weeks' delay in a major project can spell the difference between great success and massive losses, even bankruptcy. Expressed as "a doubling every 18 months", Moore's law suggests the phenomenal progress of technology in recent years. Expressed on a shorter timescale, however, Moore's law equates to an average performance improvement in the industry as a whole of over 1% a week. For a manufacturer competing in the cut-throat CPU market, a new product that is expected to take three years to develop and is just two or three months late is 10 to 15% slower, bulkier, or lower in storage capacity than the directly competing products, and is usually unsellable.

Future trends

As of Q1 2006, current PC processors are fabricated at the 90 nm level and 65 nm chips are just being rolled out by Intel (Pentium D & Intel Core). A decade ago, chips were built at a 500 nm level. Companies are working on using nanotechnology to solve the complex engineering problems involved in producing chips at the 45 nm, 30 nm, and even smaller levels—a process that will postpone the industry meeting the limits of Moore's Law.

Recent computer industry technology "roadmaps" predict (as of 2001) that Moore's Law will continue for several chip generations. Depending on the doubling time used in the calculations, this could mean up to 100 fold increase in transistor counts on a chip in a decade. The semiconductor industry technology roadmap uses a three-year doubling time for microprocessors, leading to about nine-fold increase in a decade.

In Early 2006, IBM researchers announced that they had developed a technique to print circuitry only 29.9 nm wide using deep-ultraviolet (DUV, 193-nanometer) optical lithography. IBM claims that this technique may allow chipmakers to use current methods for seven years while continuing to achieve results predicted by Moore's law. New methods that can achieve smaller circuits are predicted to be substantially more expensive.

Since the rapid exponential improvement could (in theory) put 100 GHz personal computers in every home and 20 GHz devices in every pocket, some commentators have speculated that sooner or later computers will meet or exceed any conceivable need for computation. This is only true for some problems—there are others where exponential increases in processing power are matched or exceeded by exponential increases in complexity as the problem size increases. See computational complexity theory and complexity classes P and NP for a (somewhat theoretical) discussion of such problems, which occur very commonly in applications such as scheduling.

It is important to note that the exponential increase in frequency of operation as the only method of increasing computation speed is misleading. What matters is the exponential increase in useful work (or instructions) executed per unit time. In fact, newer processors are actually being made at lower clock speeds, with focus on larger caches and multiple computing cores. The reason for this is that higher clock speeds correspond to exponential increases in temperature, such that it becomes almost impossible to produce a CPU that runs reliably at speeds higher than 5 GHz or so.

Extrapolation partly based on Moore's Law has led futurologists such as Vernor Vinge, Bruce Sterling and Ray Kurzweil to speculate about a technological singularity. However, on April 13, 2005, Gordon Moore himself stated in an interview that the law may not hold valid for too long, since transistors may reach the limits of miniaturization at atomic levels.

}}

While this time horizon for Moore's law scaling is possible, it does not come without underlying engineering challenges. One of the major challenges in integrated circuits that use nanoscale transistors is increase in parameter variation and leakage currents. As a result of variation and leakage, the design margins available to do predictive design is becoming harder and additionally such systems dissipate considerable power even when not switching. Adaptive and statistical design along with leakage power reduction is critical to sustain scaling of CMOS. A good treatment of these topics is covered in Leakage in Nanometer CMOS Technologies. Other scaling challenges include:

The ability to control parasitic resistance and capacitance in transistors,
The ability to reduce resistance and capacitance in electrical interconnects,
The ability to maintain proper transistor electrostatics that allow the gate terminal to control the ON/OFF behavior,
Increasing effect of line edge roughness,
Dopant fluctuations,
System level power delivery,
Thermal design to effectively handle the dissipation of delivered power, and
Solve all these challenges with ever reducing cost of manufacturing of the overall system.

Kurzweil projects that a continuation of Moore's law until 2019 will result in transistor features just a few atoms in width. Although this means that the strategy of ever finer photolithography will have run its course, he speculates that this does not mean the end of Moore's Law:

}}

Thus Kurzweil conjectures that it is likely that some new type of technology will replace current integrated-circuit technology, and that Moore's Law will hold true long after 2020. He believes that the exponential growth of Moore's Law will continue beyond the use of integrated circuits into technologies that will lead to the technological singularity. The Law of Accelerating Returns described by Ray Kurzweil has in many ways altered the public's perception of Moore's law. It is a common (but mistaken) belief that Moore's Law makes predictions regarding all forms of technology, when really it only concerns semiconductor circuits. Many futurists still use the term "Moore's Law" to describe ideas like those put forth by Kurzweil.

Krauss and Starkman announced an ultimate limit of around 600 years in their paper "Universal Limits of Computation", based on rigorous estimation of total information-processing capacity of any system in the Universe.

Then again, the law has often met obstacles that appeared insurmountable, before soon surmounting them. In that sense, Mr. Moore says, he now sees his law as more beautiful than he had realised. "Moore's Law is a violation of Murphy's Law. Everything gets better and better."

Other considerations

Not all aspects of computing technology develop in capacities and speed according to Moore's Law. Random Access Memory (RAM) speeds and hard drive seek times improve at best a few percentages per year. Since the capacity of RAM and hard drives is increasing much faster than is their access speed, intelligent use of their capacity becomes more and more important. It now makes sense in many cases to trade space for time, such as by precomputing indexes and storing them in ways that facilitate rapid access, at the cost of using more disk and memory space: space is getting cheaper relative to time.

Another, sometimes misunderstood, point is that exponentially improved hardware does not necessarily imply exponentially improved software to go with it. The productivity of software developers most assuredly does not increase exponentially with the improvement in hardware, but by most measures has increased only slowly and fitfully over the decades. Software tends to get larger and more complicated over time, and Wirth's law even states that "Software gets slower faster than hardware gets faster".

Moreover there is popular misconception that the clock speed of a processor determines its speed, also known as the Megahertz Myth. This actually also depends on the number of instructions per tick which can be executed (as well as the complexity of each instruction, see MIPS, RISC and CISC), and as such the clock speed can only be used for comparison between two identical circuits. Of course, other factors are to be taken into consideration such as the bus size and speed of the peripherals. As such, most popular evaluations of "computer speed" are inherently biased without an understanding of the underlying technology. This is especially true now that popular manufacturers play with public perception of speed, focusing on advertising the clock rate of new products.

As the cost to the consumer of computer power falls, the cost for producers to achieve Moore's Law has the opposite trend: R&D, manufacturing, and test costs have increased steadily with each new generation of chips. As the cost of semiconductor equipment is expected to continue increasing, manufacturers must sell larger and larger quantities of chips to remain profitable. (The cost to tape-out a chip at 0.18um was roughly $300,000 USD. The cost to tape-out a chip at 90nm exceeds $750,000 USD, and the cost is expected to exceed $1.0M USD for 65nm.) In recent years, analysts have observed a decline in the number of "design starts" at advanced process nodes (0.13u and below.) While these observations were made in the period after the year 2000 economic downturn, the decline may be evidence that traditional manufacturers in the long-term global market cannot economically sustain Moore's Law. However, Intel was reported in 2005 as stating that the downsizing of silicon chips with good economics can continue for the next decade . Intels prediction of increasing use of materials other than silicon, was verified in mid 2006, as was its intent of using trigate transistors around 2009. Researchers from IBM and the Georgia Institute of Technology created a new speed record when they ran a silicon/germanium helium supercooled chip at 500 gigahertz (GHz) . The chip operated above 500 GHz at 4.5 K (451 degrees below zero Fahrenheit) and simulations showed that it could likely run at 1,000 GHz.

References and notes

External links

Articles

Intel's information page on Moore's Law – With link to Moore's original 1965 paper
Intel press kit released for Moore's Law's 40th anniversary, with a 1965 sketch by Moore
The Lives and Death of Moore's Law – By Ilkka Tuomi; a detailed study on Moore's law and its historical evolution and its criticism by Kurzweil.
Moore says nanoelectronics face tough challenges – By Michael Kanellos, CNET News.com, 9 March, 2005
It's Moore's Law, But Another Had The Idea First by John Markoff
Law that has driven digital life: The Impact of Moore's Law – A comprehensive BBC News article, 18 April, 2005
IBM Research Demonstrates Path for Extending Current Chip-Making Technique – Press release from IBM on new technique for creating line patterns, 20 February, 2006

Data

Intel IA-32 CPU Speeds since 1994. Speed increases in recent years have seemed to slow down (in terms of percentage increase per year).

FAQs

a C|net FAQ about Moore's Law

Gourt Home::Gourt :: Moore's law