Gourt Home::Gourt :: Barium fluoride
| Barium fluoride | |
|---|---|
| General | |
| Molecular formula | BaF2 |
| Molar mass | 175.324 g.mol-1 |
| Appearance | white cubic crystals |
| CAS number | 7787-32-8 |
| Properties | |
| Density and phase | 4.893 g.cm-3, solid |
| Solubility in water | 1.7 g/kg (26°C) |
| Solubility in methanol | |
| Solubility in ethanol | |
| Melting point | 1368 °C |
| Boiling point | 2260 °C |
| Magnetic Susceptibility | -5.1e-005 cm3/mol |
| Structure | |
| Coordination geometry | ? |
| Crystal structure | cubic |
| Thermodynamic data | |
| Std enthalpy of formation ? | −???? kJ/mol |
| Standard molar entropy S | ??? J·K−1·mol−1 |
| Heat of Fusion | 101.5 J/g |
| Hazards | |
| MSDS | External MSDS |
| EU classification | Toxic (T) |
| R-phrases | , |
| S-phrases | |
| Flash point | Non-flammable |
| Supplementary data page | |
| Structure and properties | n, εr, etc. |
| Thermodynamic data | Phase behaviour Solid, liquid, gas |
| Spectral data | UV, IR, NMR, MS |
| Related compounds | |
| Other anions | Barium chloride Barium bromide Barium iodide |
| Other cations | Calcium fluoride Strontium fluoride |
| Except where noted otherwise, data are given for materials in their [[standard | |
Barium fluoride (BaF2) is a chemical compound of barium and fluorine, also known as Barium(II) fluoride. It is a solid which can be a transparent crystal.
Applications
Barium Fluoride is transparent from the ultraviolet to the infrared, from 150-200 nm to 11-11.5 µm, and can be used as a material to make optical components such as lenses. It is used eg. in windows for infrared spectroscopy, in particular in the field of fuel oil analysis. Its transmittance at 200 nm is relatively low (0.60), but at 500 nm it goes up to 0.96-0.97 and stays at that level until 9 µm, then it starts falling off (0.85 for 10 µm and 0.42 for 12 µm).
Barium fluoride is also a common, very fast (one of the fastest) scintillator for the detection of X-rays, gamma rays or other high energy particles. One of its applications is the detection of 511 keV gamma photons in positron emission tomography; other material used in this application is eg. bismuth germanate. It responds also to alpha and beta particles, but, unlike most scintillators, it does not glow in ultraviolet light. It can be also used for detection of high-energy (10-150 MeV) neutrons, and use pulse shape discrimination techniques to separate them from simultaneously occuring gamma photons.
When heated to 500 °C, it gets corroded by water, but in dry environment it can be used up to 800 °C. Prolonged exposure to moisture degrades transmission in the vacuum UV range. It is less resistant to water than calcium fluoride, but is the most resistant of all the optical fluorides to high-energy radiation, though its far ultraviolet transmittance is lower than theirs. It is quite hard, and very sensitive to thermal shock.
Barium fluoride is used as a preopacifying agent and in enamel and glazing frits production. Its other use is in the production of welding agents (an additive to some fluxes, a component of coatings for welding rods and in welding powders). It is also used in metallurgy, as a molten bath for refining aluminium.
External links
- http://www.solvay-fluor.com/chemicals/Barium_fluoride
Suppliers
- http://www.crystran.co.uk/products.asp?productid=75
- http://www.almazoptics.com/BaF2.htm
MSDS
Barium compounds | Fluorides | Optical materials | Phosphors and scintillators
"Barium fluoride"