Air safety

Air safety is a broad term encompassing the theory, investigation and categorisation of flight failures, and the prevention of such failures through appropriate regulation, as well as through education and training. It can also be applied in the context of campaigns that inform the public as to the safety of air travel. No matter the speed and economy of any mode of transportation, if it is not perceived and demonstrated as safe, it will find few customers and, with few customers, unless it can still be priced to make a profit, the transportation mode will fail and fade from the scene. The dirigibles of the 1920's and 30's provide a good example of this principle.

Balanced against the speed of travel and the convenience of schedule, transportation by air must overcome various phobias of much of the traveling public - fear of heights, enclosed spaces, surrender of control. Cargo shipments may not care about human phobias but, if the shipment doesn't arrive safely, again, the air carrier will find few customers seeking more service.

Air accidents tend to make national, even international news. In major airliner accidents hundreds of passengers may be affected. Add to this the number of family members who will be available at the airports at either end of the flight, ready for interviews, providing pictures of anguish on television news and the task before the industry becomes plain.

Therefore, the entire industry and the government bodies who regulate and support them, put a great deal of effort into making air transportation not only appear safe, but demonstrate that it is the safest mode of transportation available.

Institutions

Certification

In most countries, civil aircraft have to be certified by the civil aviation authority (CAA) to be allowed to fly. The major aviation authorities worldwide are the US Federal Aviation Administration (FAA) the European Aviation Safety Agency (EASA) (which provides regulatory advice to the European Union and to a degree supplanted the regulatory bodies of member countries) and the Joint Aviation Authorities (JAA) which advises the CAAs that are members of the European Civil Aviation Conference). FAA, EASA and JAA collaborate on many issues, especially in order to provide streamlined procedure and avoid conflicting or duplicate requirements. FAA and EASA are, in particular, primarily responsible for the certification of the airliners from the two major manufacturers Boeing and Airbus.

Aircraft are certified against standards set out in the code for each CAA. Those codes are very similar and differ primarily in equipment and environmental standards. Regulations on maintenance, repair and operation provide further direction to the owners of the aircraft so that the aircraft continues to meet design standards.

United States

During the 1920s, the first laws were passed in the USA to regulate civil aviation. Of particular significance was the Air Commerce Act 1926, which required pilots and aircraft to be examined and licensed, for accidents to be properly investigated, and for the establishment of safety rules and navigation aids, under the Aeronautics Branch of the Department of Commerce.

Despite this, in 1926 and 1927 there were a total of 24 fatal commercial airline crashes, a further 16 in 1928, and 51 in 1929 (killing 61 people), which remains the worst year on record at an accident rate of about 1 for every 1,000,000 miles flown. Based on the current numbers flying, this would equate to 7,000 fatal incidents per year.

Fortunately, the fatal incident rate has declined steadily ever since, and, since 1997 the number of fatal air accidents has been no more than 1 for every 2,000,000,000 miles flown, making it one of the safest modes of transport.

Safety improvements have resulted from a wide variety of factors, including improved aircraft design, engineering and maintenance, the evolution of navigation aids, and safety protocols and procedures.

Navigation aids

One of the first navigation aids to be introduced (in the USA in the late 1920s) was airfield lighting to assist pilots to make landings in poor weather or after dark. The Precision Approach Path Indicator was developed from this in the 1930s, indicating to the pilot the angle of descent to the airfield. This later became adopted internationally through the standards of the International Civil Aviation Organization (ICAO).

With the spread of radio technology, several experimental radio based navigation aids were developed from the late 1920s onwards. These were most successfully used in conjunction with instruments in the cockpit in the form of Instrument Landing Systems (ILS), first used by a scheduled flight to make a landing in a snowstorm at Pittsburgh in 1938. A form of ILS was adopted by the ICAO for international use in 1949.

Following the development of radar in World War II, it was deployed as a landing aid for civil aviation in the form of Ground Control Approach (GCA) systems, joined in 1948 by Distance Measuring Equipment (DME), and in the 1950s by airport surveillance radar as an aid to air traffic control.

All of the ground-based navigation aids are rapidly being supplemented by satellite-based aids like GPS, which make it possible for aircrews to know their position with great precision anywhere in the world. With the arrival of Wide Area Augmentation System (WAAS), GPS navigation has become accurate enough for vertical (altitude) as well as horizontal use, and is being used increasingly for instrument approaches as well as en-route navigation. However, since the GPS constellation is a single-point of failure that can be switched off by the U.S. military in time of crisis, ground-based navigation aids are still required for backup.

Air safety topics

Lightning

Boeing studies have shown that airliners are struck by lightning on average of twice per year. While the "flash and bang" can be dramatic and startling to the passengers and crew, aircraft are able to withstand normal lightning strikes.

The dangers of more powerful positive lightning were not understood until the destruction of a glider in 1999 ^*. It has since been suggested that positive lightning may have caused the crash of Pan Am Flight 214 in 1963. At the present time aircraft are not designed to withstand such strikes, since their existence was unknown at the time standards were set.

The effects of normal lightning on traditional metal-covered aircraft are well understood and serious damage from a lightning strike on an airplane is rare. However, as more and more aircraft, like the upcoming Boeing 787, whose whole exterior is made of non-conducting composite materials take to the skies, additional design effort and testing must be made before certification authorities will permit these aircraft in commercial service.

Ice and snow

Snowy and icy conditions are frequent contributors to airline accidents. The December 8, 2005 accident where Southwest Airlines Flight 1248 slid off the end of the runway in heavy snow conditions is just one of many examples. Just as on a road, ice and snow buildup can make braking and steering difficult or impossible if severe enough.

The icing of wings is another common problem that is well known and has had measures developed to combat it. The greatest concern regarding icing is that even a small amount of ice or coarse frost can greatly decrease the ability of a wing to develop lift. This could prevent an otherwise capable aircraft from safely taking off. If ice builds up during flight the result can be catastrophic as evidenced by the crash of American Eagle Flight 4184 (an ATR-72 aircraft) near Roselawn, Indiana on October 31, 1994, killing 68.

Airlines and airports expend considerable effort to ensure that aircraft are properly deiced before takeoff whenever the weather threatens to create icing conditions. Modern airliners are designed to prevent ice buildup on wings, engines, and tails by either routing heated air from jet engines through the leading edges of the wing, tail, and inlets, or on slower aircraft, by use of inflatable rubber "boots" that expand and break off any accumulated ice.

Finally, airline dispatch offices keep close watch on weather along the routes of their flights, helping the pilots avoid the worst of possible inflight icing conditions.

Engine failure

Although aircraft are now designed to fly even after the failure of one or more aircraft engines, the failure of the second engine on one side for example is obviously serious. Losing all engine power is even more serious, as illustrated by the 1970 Dominicana DC-9 air disaster, when fuel contamination caused the failure of both engines. To have an emergency landing place is then very important.

In the 1983 Gimli Glider incident, an Air Canada flight ran out of fuel in flight and had to glide to an emergency landing. The inclusion of a Ram Air Turbine allowed the aircraft to be controlled with complete loss of power and resulted in zero fatalities even with complete loss of electro-hydraulic system.

The ultimate form of engine failure, physical separation, occurred in 1979 when a complete engine detached from American Airlines Flight 191, causing damage to the aircraft from which the pilots were unable to recover.

Metal fatigue

Metal fatigue has occasionally caused failure either of the engine (for example in the 1989 Kegworth Air Disaster), or of the aircraft body, for example the De Havilland Comets in 1953 and 1954 and Aloha Flight 243 in 1988. Now that the subject is better understood, rigorous inspection and nondestructive testing procedures are in place to attempt to identify potential problems.

Delamination

Composite materials consist of layers of fibers embedded in a resin matrix. In some cases, especially when subjected to cyclic stress, the fibers may tear off the matrix, the layers of the material then separate from each other - a process called delamination, and form a mica-like structure which then falls apart. As the failure develops inside the material, nothing is shown on the surface; instrument methods (often ultrasound-based) have to be used.

Numerous modern aircraft have developed delamination problems, but most were discovered before they caused a catastrophic failure. Delamination risk is as old as composite material. Even in the 1940s, several Yak-9s experienced delamination of plywood in their construction.

Stalling

Stalling an aircraft (increasing the angle of attack to a point at which the wings fail to produce enough lift) is a potential danger, but is normally recoverable. Certain devices have been developed to warn the pilot as stall approaches. These include stall warning horns (now standard on virtually all powered aircraft) stick shakers and voice warnings. The best known stall-related airline accident was the Staines air disaster in 1972.

Fire

Safety regulations control aircraft materials and the requirements for automated fire safety systems. Usually these requirements take the form of required tests. The tests measure flammability and the toxicity of smoke. When the tests fail, they fail on a prototype in an engineering laboratory, rather than in an aircraft.

Fire on board the aircraft, and more especially the toxic smoke generated, have been the cause of several incidents. An electrical fire on Air Canada Flight 797 in 1983 caused the deaths of 23 of the 46 passengers, resulting in the introduction of floor level lighting to assist people to evacuate a smoke-filled aircraft. Two years later a fire on the runway caused the loss of 53 lives, 48 from the effects of smoke, in the 1985 Manchester air disaster. This incident raised serious concerns over the standard aircraft emergency evacuation time of ninety seconds, and calls for the introduction of smoke hoods or misting systems although both were rejected. It did result in the introduction of revised overwing emergency exit doors on certain new aircraft, and a small increase in the spacing between seats next to the emergency exit.

The cargo holds of most airliners are equipped with "fire bottles" (essentially remote-controlled fire extinguishers) to combat a fire that might occur in with the baggage and freight below the passenger cabin. This was due to a terrible accident in 1996. In May of that year a ValuJet DC-9 crashed into the Florida Everglades a few minutes after takeoff after a fire broke out in the forward cargo hold. All 110 aboard were killed.

The investigation determined that improperly packaged chemical oxygen generators (used for the drop-down oxygen masks in the aircraft cabin) had been loaded into the cargo hold. Oxygen generators produce oxygen through a chemical reaction that also generates hundreds of degrees of heat. When installed for use in the ceiling above the passenger seats they are surrounded by heat-resistant shielding and present no fire hazard. On this flight they had been put loosely into a cardboard box for shipment from a maintenance facility.

Probably due to being jostled together during takeoff one or more of the generators ignited and produced an oxygen-rich environment. The cardboard box containing the generators would have quickly caught fire from the heat of the ignited generator. This fire spread to an aircraft tire that was also carried in the hold. Ordinarily the fire would have smothered itself because the cargo holds on larger airliners were designed to be either airtight or have fire-extinguishing "fire bottles" installed. But the oxygen generators kept feeding oxygen to the fire, defeating the smothering design of the DC-9 hold. The fire rapidly burned through the passenger cabin floor, incapacitating all aboard with smoke and poisonous gasses very quickly. The pilots, although having smoke masks and separate oxygen supplies, had no hope of maintaining control as control cables and electrical wiring burned through.

The maintenance facility (SabreTech) was subjected to large fines and ValuJet, due to this accident and other irregularities, was grounded. The airline reemerged as a smaller airline and eventually merged with AirTran, a smaller carrier. Adopting the acquired airline's name, the airline has since provided safe service. For the airline industry, rules for the shipment of oxygen generators was severely restricted and cargo holds on larger airliners were required to have "fire bottles" installed.

At one time firefighting foam paths were laid down before an emergency landing, but the practice was considered only marginally effective, and concerns about the depletion of firefighting capability due to pre-foaming led the United States FAA to withdraw its recommendation in 1987.

Bird strike

Bird strike is an aviation term for a collision between a bird and an aircraft. It is a common threat to aircraft safety and has caused a number of fatal accidents. In 1988 an Ethiopian Airlines Boeing 737 sucked pigeons into both engines during take-off and then crashed in an attempt to return to the Bahir Dar airport; of the 104 people aboard, 35 died and 21 were injured. In another incident in 1995, a Dassault Falcon 20 crashed at a Paris airport during an emergency landing attempt after sucking lapwings into an engine, which caused an engine failure and a fire in the airplane fuselage; all 10 people on-board were killed. ^*

Modern jet engines have the capability of surviving an ingestion of a bird. Small fast planes, such as military jet fighters, are at higher risk than big heavy multi-engine ones.

The highest risk of the bird strike is during the takeoff and landing, in low altitudes, which is in the vicinity of the airports. Some airports use active countermeasures, ranging from a person with a shotgun through recorded sounds of predators to employing falconers. Poisonous grass can be planted that is not palatable to birds, nor to insects that attract insectivorous birds. Passive countermeasures involve sensible land-use management, avoiding conditions attracting flocks of birds to the area (eg. landfills).

Ground damage

Aircraft are often victims of damage caused by ground equipment at the airport. In the act of servicing the aircraft between flights a great deal of ground equipment must operate in close proximity to the fuselage and wings. Occasionally the aircraft gets bumped or worse.

Damage may be in the form of simple scratches in the paint or small dents in the skin. However, because aircraft structures (including the outer skin) play such a critical role in the safe operation of a flight, all damage is inspected, measured and possibly tested to ensure that any damage is within safe tolerances. A dent that may look no worse than common "parking lot damage" to an automobile can be serious enough to ground an airplane until a repair can be made.

An example of the seriousness of this problem was the December 26, 2005 depressurization incident on an Alaska Airlines MD-83 aircraft. During ground services a ramp worker hit the side of the aircraft with a piece of ground equipment. This created a crease in the metal skin. This damage wasn't reported and the plane departed. Climbing through 26,000 feet the crease in the metal gave way due to the growing difference in pressure between the inside of the aircraft and the outside air. The cabin depressurized with a bang, frightening all aboard and necessitating a rapid descent back to denser (breathable) air and an emergency landing.

The three pieces of ground equipment that most frequently damage aircraft are the passenger boarding bridge, catering trucks, and cargo "beltloaders'. However, any other equipment found on an airport ramp can damage an aircraft through careless use, high winds, mechanical failure, and so on.

The generic industry colloquial term for this damage is "ramp rash."

Volcanic ash

Plumes of volcanic ash near active volcanoes present a risk especially for night flights. The ash is hard and abrasive and can quickly cause significant wear on the propellers and turbocompressor blades, and scratch the cabin windows, impairing visibility. It contaminates fuel and water systems, can jam gears, and can cause a flameout of the engines. Its particles have low melting point, so they melt in the combustion chamber and the ceramic mass then sticks on the turbine blades, fuel nozzles, and the combustors, which can lead to a total engine failure. It can get inside the cabin and contaminate everything there, and can damage the airplane electronics. ^*

There are many instances of damage to jet aircraft from ash encounters. In one of them in 1982, a British Airways Boeing 747 flew through an ash cloud, lost all four engines, and descended from 36,000 feet to only 12,000 feet before the flight crew managed to restart the engines.

With the growing density of air traffic, encounters like this are becoming more common. In 1991 the aviation industry decided to set up Volcanic Ash Advisory Centers (VAACs), one for each of 9 regions of the world, acting as liaisons between meteorologists, volcanologists, and the aviation industry. ^*

Human factors

Human factors including pilot error are another potential danger, and currently the most common factor of aviation crashes. Much progress in applying human factors to improving aviation safety was made around the time of World War II by people such as Paul Fitts and Alphonse Chapanis. However, there has been progress in safety throughout the history of aviation, such as the development of the pilot's checklist in 1937 ^*. The ability of the flight crew to maintain situation awareness is a critical human factor in air safety.

Failure of the pilots to properly monitor the flight instruments resulted in the crash of Eastern Air Lines Flight 401 in 1972, and error during take-off and landing can have catastrophic consequences, for example cause the crash of Prinair Flight 191 on landing (also in 1972), and the Chinook Helicopter Crash (1994) in thick fog. As in this latter case, other factors such as the weather often contribute to pilot error incidents.

Pilot error is often a factor in the collision of aircraft. This can take place in the air (1978 PSA Flight 182) or on the ground (1977 Tenerife disaster).

Very rarely, flight crew members are arrested or subject to disciplinary action for being intoxicated on the job. In 1990, three Northwest Airlines crew members were sentenced to jail for flying from Fargo, North Dakota to Minneapolis-St. Paul International Airport while drunk. In 2001, Northwest fired a pilot who failed a breathalyzer test after flying from San Antonio, Texas to Minneapolis-St. Paul. In July 2002, two America West pilots were arrested just before they were scheduled to fly from Miami, Florida to Phoenix, Arizona because they had been drinking alcohol. The pilots have been fired from America West and the FAA revoked their pilot's licenses. As of 2005 they await trial in a Florida court ^*. The incident created a public relations problem and America West has become the object of many jokes about drunk pilots. While these drunk-flying incidents did not result in crashes, they underscore the role that poor human choices can play in air accidents.

Human factors incidents are not limited to errors by the pilots. The failure to close a cargo door properly on Turkish Airlines Flight 981 in 1974 resulted in the loss of the aircraft - however the design of the cargo door latch was also a major factor in the incident.

Controlled flight into terrain (CFIT) is a class of accident in which an undamaged aircraft is flown, under control, into terrain. CFIT accidents typically are a result of pilot error or of navigational system error. Some pilots, convinced that advanced electronic navigation systems such as GPS and INS coupled with Flight Management System computers , or over-relianced on them, are partially responsible for these accidents, have called CFIT accidents "computerized flight into terrain". Failure to protect Instrument Landing System critical areas can also cause controlled flight into terrain. Crew awareness and monitoring of navigational systems can prevent or eliminate CFIT accidents. Crew resource management is a modern method now widely used to improve the human factors of air safety. The Aviation Safety Reporting System, or ASRS is another.

Other technical aids can be used to help pilots maintain situational awareness. A ground-collision warning system is an on-board system that will alert a pilot if the aircraft is about to fly into the ground.

Terrorism can also be considered a human factor, since aircraft have crashed after being hijacked, for example the four jet-liners that were crashed in the September 11, 2001 attacks.

Although most air crews are screened for psychological fitness, some may take suicidal actions. In the case of EgyptAir Flight 990, it appears that the first officer (co-pilot) deliberately dove his aircraft into the Atlantic Ocean while the captain was away from his station, in 1999 off of Nantucket, MA, USA. Motivations are unclear, but recorded inputs from the showed no mechanical problem, no other aircraft in the area, and was corroberated by the voice cockpit recorder.

Certain electronic equipment use is partially or entirely prohibited as it may interfere with aircraft operation, such as causing compass deviations. Use of radios and calculators may be prohibited when an aircraft is taking off or landing while the potential risk is higher than flying in the air, but permitted at other times. Most flights prohibit all use of cell phones because the phones are thought to be capable of seriously disturbing aircraft. Some plane crashes are believed to have been caused by the use of cell phones. A few flights now allow use of cell phones, where the aircraft have been certified as capable of withstanding high frequency radiation.

Airport design

Airport design and location can have a big impact on air safety, especially since some airports such as Chicago's Midway Airport were originally built for propeller planes and many airports are in congested areas where it is difficult to meet newer safety standards. For instance, the FAA issued rules in 1999 calling for a Runway Safety Area, usually extending 500 feet to each side and 1000 feet beyond the end of a runway. This is intended to cover ninety percent of the cases of an aircraft leaving the runway by providing a buffer space free of obstacles. Since this is a recent rule, many airports do not meet it. One method of substituting for the 1000 feet at the end of a runway for airports in congested areas is to install an Engineered Materials Arrestor System, or EMAS. These systems are usually made of a lightweight, crushable concrete that absorbs the energy of the aircraft to bring it to a rapid stop. They have stopped three aircraft (as of 2005) at JFK Airport.

Accidents and incidents

Accidents and incidents in aviation
Flight data recorder, includes Cockpit voice recorder

Investigators

Air Accidents Investigation Branch (UK)
National Transportation Safety Board (USA)
Transportation Safety Board (Canada)
Bundesstelle für Flugunfalluntersuchung (Germany)
Bureau d'Enquêtes et d'Analyses pour la sécurité de l'Aviation Civile (France)
Australian Transport Safety Bureau (Australia)

Regulation

External links

Aviation

Luftsicherheit | sécurité aérienne | luchtverkeersveiligheid | Segurança aérea | Lentoturvallisuus

Gourt Home::Gourt :: Air safety