| 1,1,1,2-Tetrafluoroethane
|
1,1,1,2-Tetrafluoroethane.gif
| General
|
| Systematic name
| 1,1,1,2-tetrafluoroethane
|
| Other names
| Freon 134a HFC-134a R-134a
|
| Molecular formula
| C2H2F4
|
| SMILES
| FC(F)(F)C(F)
|
| Molar mass
| 102.03 g/mol
|
| Appearance
| Colorless gas.
|
| CAS number
|
|
| Properties
|
| Density and phase
| 0.00425 g/cm3, gas.
|
| Solubility in water
| Insoluble.
|
| Melting point
| -103.3°C (169.85 K)
|
| Boiling point
| -26.08°C (247.07 K)
|
| Structure
|
| Molecular shape
| Planar.
|
| Dipole moment
| ? D
|
| Hazards
|
| MSDS
| External MSDS
|
| Main hazards
| Asphyxiant.
|
| NFPA 704
|
|
| Flash point
| Non-flammable.
|
| R/S statement
| R: ? S: , , , .
|
| RTECS number
| KI8842500
|
| Supplementary data page
|
Structure and properties
| n, εr, etc.
|
Thermodynamic data
| Phase behaviour Solid, liquid, gas
|
| Spectral data
| UV, IR, NMR, MS
|
| Related compounds
|
| Other anions
| ?
|
| Other cations
| ?
|
| Related refrigerants
| Difluoromethane Pentafluoroethane
|
| Related compounds
| 1,1,2,2,2-pentafluoroethane 2-Chloro- 1,1,1,2-tetrafluoroethane 1,1,1-Trichloroethane
|
Except where noted otherwise, data are given for materials in their standard state (at 25°C, 100 kPa) Chemical infobox
|
1,1,1,2-Tetrafluoroethane, also called simply
tetrafluoroethane,
R-134a or
HFC-134a, is a
refrigerant without an
ozone depletion potential and thermodynamic properties similar to
R-12 (dichlorodifluoromethane). It has the formula CH
2FCF
3, and a boiling point of −26.6 °C (−15.9 °F).
Uses
1,1,1,2-Tetrafluoroethane is an inert gas used primarily as a "high-temperature" refrigerant for domestic refrigeration and automobile air conditioners. Other uses include plastic foam blowing, as a cleaning solvents and as a propellant for the delivery of pharmaceuticals (e.g.
bronchodilators),
canned air, and in air driers, i.e., for removing the moisture from
compressed air. Moisture present in compressed air has a harmful effect on
pneumatic systems. Tetrafluoroethane has also been used to cool computers in some
overclocking attempts.
History
R-134a first appeared in the early
1990s as a replacement for
Dichlorodifluoromethane (R-12), which has significant ozone depleting properties.
R-134a has been atmospherically modeled for its impact on depleting ozone and as a contributor to global warming. Research suggests that over the past 10 years the concentration of 1,1,1,2-tetrafluoroethane has increased significantly in the Earth atmosphere, has insignificant ozone depletion potential (
ozone layer), significant
global warming potential and negligible acidification potential (
acid rain). 1,1,1,2-Tetrafluoroethane is slowly converted to
trifluoroacetic acid through a
radical reaction in the upper
atmosphere and leads to a detectable amount of several ng/L
rain.
Safety
Contact of tetrafluoroethane with flames or hot surfaces (in excess of around 120 °F or 50 °C) may cause vapor
decomposition and the emission of
toxic gases. Tetrafluoroethane itself has an
LC50 (lethal concentration for 50% of subjects) in rats of 1,500 g/m
3, making it relatively non-toxic. However, its gaseous form is denser than air, and will displace air in the lungs. This can result in asphyxiation if excessively inhaled.
[ ] Spray cans containing tetrafluoroethane, when turned upside-down, can become effective freeze sprays. Gases compressed into liquids absorb a lot of energy upon vaporization, so liquid tetrafluoroethane will lower the temperature of objects it comes into contact with as it evaporates.
According to the MSDS, "In a two-year inhalation study, HFC-134a at a concentration of 50,000 ppm, produced an increase in late-occuring benign testicular tumors, testicular hyperplasia and testicular weight."
References
External links
- http://ptcl.chem.ox.ac.uk/MSDS/TE/1,1,1,2-tetrafluoroethane.html
- http://www.inchem.org/documents/cicads/cicads/cicad11.htm
- http://www.rmsgas.com/quickchangemsds.htm
Organofluorides | Refrigerants
R134a | R134a